Configure/BNA

Property	Function
Usercode	Specifies the usercode for the BNA Generate job. This property is limited to a maximum length of 17 alphanumeric characters. By default, this property is empty. This property is enabled when Configure Set Type is set to BNA Generate. This property is specific to Segments only.
Access Code	Specifies the access code for the BNA Generate job. This property is limited to a maximum length of 17 alphanumeric characters. By default, this property is empty. This property is enabled when Configure Set Type is set to BNA Generate. This property is specific to Segments only.
Charge Code	Specifies the charge code to be used for application accounting purposes. All resource usage by the BNA Generate will be debited to this charge code. This property is limited to a maximum length of 45 alphanumeric characters. By default, this property is empty. This property is enabled when Configure Set Type is set to BNA Generate. This property is specific to Segments only.
Configure Set Type	Provides the user with a single option to specify what the configuration is used for. The following options are available for this property: BUILD – Indicates that the configure set is used for a normal build CONFIGURE – Indicates that the configure set is used for configuring a target system with Runtime Transfer. RDB – Indicates that the configure set is used to specify a Remote DB secondary database and system. BNA Generate – Indicates that the configure set is used to create a BNA Generate system. (Not implemented in this release). This property is specific to Segments only.
Configure Work Pack	Specifies the name of the pack on which the Configuration work files are located on the target host. This property is limited to a maximum length of 17 alphanumeric characters. By default, this property is empty. This property is disabled when Configure Set Type is set to BUILD. This property is specific to Segments only.
DMSII Pack	Specifies the name of the pack where an alternative version of DMS II software is located. This location and the value entered in the DMSII Usercode property identify the alternative version of DMS II to be used by the BNA Generate. This property is limited to a maximum length of 17 alphanumeric characters. By default, this property is empty. This property is enabled when Configure Set Type is set to BNA Generate. This property is specific to Segments only.
DMSII Usercode	Specifies the usercode for use with an alternative version of DMS II software. This usercode and the value entered in the DMS II Pack field identify the alternative version of DMS II to be used by the BNA Generate. This property is limited to a maximum length of 17 alphanumeric characters. By default, this property is empty. This property is enabled when Configure Set Type is set to BNA Generate. This property is specific to Segments only.
Generate Family	Specifies the desired family specification to ensure that the required DMSII files and compilers are visible to the generate process. You must make an entry in this field if: The system software required during the generation is not resident on either the primary or alternate pack family of the WFL usercode family. Some or all of your installed host software is installed on a pack family called DISK. This property is limited to a maximum length of 44 alphanumeric characters. By default, this property is empty. This property is enabled when Configure Set Type is set to BNA Generate. This property is specific to Segments only.
Generate Work Pack	Specifies the location for use with BNA generate. All files produced by the BNA generate reside on this location. This property is limited to a maximum length of 17 alphanumeric characters. By default, this property is empty. This property is enabled if Configure Set Type is set to BNA Generate/Configure. This property is specific to Folders only.
MODEL Base Configuration	Specifies the configuration name of the Base System, when using the DMS Model facility. The Base System configuration must be a valid configuration. The Base System is the system on which the modeled database is modeled or based. This property is limited to a maximum length of 10 alphanumeric characters. By default, this property is empty. This property is enabled when Configure Set Type is set to CONFIGURE. This property is specific to Segments only.
Retain Existing Database	Specifies whether to retain an existing database, or initialize a new database. The following options are available for this property: Retain Existing – Retains the existing database already on the target host No Retain Existing – Initializes a new database Configure New Clone – Initializes a new cloned secondary database, if you are configuring a standby System to support a secondary database. Retain Existing Cloned – Retains existing cloned secondary database, if you are configuring a standby System to support a secondary database. By default, this property is set to Retain Existing. This property is disabled when Configure Set Type is set to BUILD. This property is specific to Segments only.
Target Host Name	Specifies the name of the target host to which the application is transferred and configured. This property is limited to a maximum length of 17 alphanumeric characters. By default, this property is empty. This property is disabled when Configure Set Type is set to BUILD. This property is specific to Segments only.
Host Builder Usercode	Specifies the usercode of the Runtime software on the target host. This property is limited to a maximum length of 17 alphanumeric characters. By default, this property is empty. This property is disabled when Configure Set Type is set to BUILD. This property is specific to Segments only.
Host Builder Pack	Specifies the name of the pack on which the Runtime software is located on the target host. This property is limited to a maximum length of 17 alphanumeric characters. By default, this property is empty. This property is disabled when Configure Set Type is set to BUILD. This property is specific to Segments only.