Note: You should begin the commissioning process by selecting a blueprint in the Blueprint tab.
In the Cores & Memory tab, provide information in the appropriate fields and then click Next. The following table provides details about various fields in the Cores & Memory tab:
Field | Action |
|---|---|
Partition Chassis | Choose the required partition chassis; for example, Chassis-B. |
Cores | Choose the number of cores you want to assign to the partition image. The number of cores available depends on the partition chassis that you have chosen. The default value is 1. |
Enable Hyper-Threading | Select the check box to enable selection of two logical processors per core. Note: If Hyper-Threading is not supported by the platform or chassis, then this option is not available. |
Logical Processors | Displays the number of logical processors, based on the number of cores. |
Memory | Choose the memory size that you want to assign to the partition image. The default value is 2. The memory range available depends on the partition chassis that you have chosen. The minimum value that can be chosen is 2 GB. Notes:
|