Starting a Partition Image

Prerequisite: The EPP has to be powered on and the desired partition image is in stopped state.

Notes:

  • By default, after commissioning the partition image the status of the partition image will be always RUNNING. It is not necessary to start the partition image after commissioning the partition image.

  • Starting the partition image is required only when

    • The partition image has previously been stopped or shut down.

    • The platform has been powered off and the initial state is set to stopped.

To start a partition image

  1. On the Fabric Manager user interface, point to System Administration, and then click CPF System.

  2. Click Platforms and Partitions.

    The Details: Platforms and Partitions screen appears.

  3. Click the Partitions tab.

  4. Double-click the partition image that you want to start.

    The Summary tab displays the information about the selected partition image.

  5. Click Start.

    The status of the partition image changes to RUNNING.