Access the partition desktop (see Accessing the Partition Image Console (Partition Desktop)) and do the following to configure detailed parameters for the target boot LUN:
Note: For some options, the utility displays additional information at the bottom of the console window.
On the HBA Port Selection screen, press the up or down arrow keys to highlight and select the HBA port you want to boot from.
Press the Tab key to select Next – Select the target WWPN, and then press Enter.
On the Remote Port Name Selection screen, press the up or down arrow keys to highlight and select the target WWPN for accessing the boot LUN on the external storage device.
Press the Tab key to select Next – Select the boot lun, and then press Enter.
On the Boot LUN Selection screen, press the up or down arrow keys to highlight and select the desired LUN.
Press the Tab key to select Next – Continue commissioning, and then press Enter.
Note: If the specified LUN contains partitions, a message is displayed. Refer to LUN is not Empty for more information on resolving the situation.