The component names for OS 2200 and OS 2200 Console names must match the names that are specified in the OS 2200 Partition Profile. The SMC Domain Name must match the unique Server Management Control name that you specify in the Firmware Web Page. If any of them does not match the name in the Partition Profile or Firmware Web Page, please tab to the corresponding input box and correct the name.

If you wish to change the names that appear in the Operations Sentinel topology for System Architecture Interface and Server Management Control please tab to the corresponding input box in the Component Name column and correct the name.

The configuration requires the RHC.rml10_5\a and RHC.rml10_6\a of the following components:

If any of them needs changes, please tab to the corresponding input box and modify the Network Name and/or IP Address. If you use a name resolution server and don't specify IP addresses, click the check box next to the statement. If the check box is checked, input boxes for IP addresses are grayed out.

Network Name is a symbolic name that represents a network device address and can be used in place of the RHC.rml10_19\a. The name is defined in the name resolution server such as DNS or WINS or is defined in the hosts file in each Operating System that refers to the name.

IP Address is a segmented network address that is defined in the Internet Protocol specification. In version 4, it is represented in the dot-decimal notation such as 192.61.246.51 for example.